Reference Manual
00809-0100-4530
F
Level Transducer Block
F.1
Overview
This section contains information on the Rosemount
Descriptions of all Transducer Block parameters, errors, and diagnostics are listed.
Figure F-1: Transducer Block Diagram
A. Digital Signal Conversion
B. Linearization
C. Temperature Compensation
D. Damping
E. Units/Ranging
F. Diagnostics
G. Channel
Definition
The transducer block contains the actual measurement data, including a level and
distance reading. Channels 1–16 are assigned to these measurements (see
The transducer block includes information about sensor type, engineering units, and all
parameters needed to configure the transmitter.
Channel definitions
Each input has an assigned channel which can be linked to the AI block. The channels for
the Rosemount
Table F-1: Channel Assignments
Channel Name
Level
Ullage
Level Rate
Reference Manual
™
5300 Level Transmitter are the following:
Channel Number
1
2
3
Level Transducer Block
™
5300 Level Transducer Block (TB).
Figure
Process variable
CHANNEL_RADAR_LEVEL
CHANNEL_RADAR_ULLAGE
CHANNEL_RADAR_LEVELRATE
April 2019
F-1).
425