Remote mounting
April 2019
E.4
Remote housing configuration in Rosemount
Radar Master
When using remote housing, the remote connection length should be configured. If the
Remote Housing is ordered with a transmitter, it is configured in the factory.
Prerequisites
Note
When disconnecting a remote housing cable from a probe in low temperatures, -22 °F (-30
°C), Rosemount Radar Master may not show that the probe is missing.
Procedure
1. Select Setup → Tank.
2. Select the Probe tab.
3. Select the Advanced button.
4. In the Remote Housing list, select the remote housing length.
5. Select Store.
424
Reference Manual
00809-0100-4530
Rosemount 5300 Level Transmitter