Appendix B Product Certifications; European Directive Information; Safety Instrumented Systems (Sis); Ordinary Location Certification - Emerson 5301HxxxxxxxxxxxxxxZZ Series Reference Manual

Reference Manual
00809-0100-4530
B Product certifications
Rev 9.20
B.1

European directive information

A copy of the EU Declaration of Conformity can be found at the end of the Quick Start
Guide. The most recent revision of the EU Declaration of Conformity can be found at
Emerson.com/Rosemount.
B.2

Safety Instrumented Systems (SIS)

SIL 3 Capable: IEC 61508 certified for use in safety instrumented systems up to SIL 3
(Minimum requirement of single use (1oo1) for SIL 2 and redundant use (1oo2) for SIL 3).
B.3

Ordinary location certification

As standard, the transmitter has been examined and tested to determine that the design
meets the basic electrical, mechanical, and fire protection requirements by a nationally
recognized test laboratory (NRTL) as accredited by the Federal Occupational Safety and
Health Administration (OSHA).
B.4

Installing equipment in North America

The US National Electrical Code
use of Division marked equipment in Zones and Zone marked equipment in Divisions. The
markings must be suitable for the area classification, gas, and temperature class. This
information is clearly defined in the respective codes.
B.5

USA

B.5.1 E5 Explosionproof (XP), Dust-Ignitionproof (DIP)
Certificate FM16US0444X
Standards FM Class 3600 – 2018; FM Class 3610 – 2010; FM Class 3611 – 2004; FM
Markings
Reference Manual
®
(NEC) and the Canadian Electrical Code (CEC) permit the
Class 3615 – 2006; FM Class 3810 – 2005; ANSI/ISA 60079-0 – 2013;
ANSI/ISA 60079-11 – 2012; ANSI/NEMA
XP CL I, DIV 1, GP B, C, D; DIP CLII/III, DIV 1, GP E, F, G; T4; -50 °C ≤ Ta ≤ 60
°C / 70 °C; Type 4X
Product certifications
®
250 – 2003;
April 2019
359