Appendix E Remote Mounting; Remote Housing, New Units; Remote Connection, Field Retrofit - Emerson 5301HxxxxxxxxxxxxxxZZ Series Reference Manual

Reference Manual
00809-0100-4530
E Remote mounting
E.1

Remote housing, new units

Remote Housing can be used to place the head apart from the probe if it is in a hot or
vibrating place. With Remote Housing, you can place the transmitter head in a better
position to be able to read the display, for example.
The remote housing assembly is shipped with the transmitter head mounted on the probe
and the remote connection in a separate box.
The transmitter head must have the remote connection installed before functioning.
The parts in the shipping unit consist of:
• Transmitter head mounted on probe
• Remote connection
—
—
—
—
—
—
E.2

Remote connection, field retrofit

To upgrade a currently installed Rosemount
housing, the embedded software needs revision 2.A2 or later, and the Spare Part Kit
(03300-7006-000X) must be ordered. The position X corresponds to the remote housing
cable length in meters.
The Rosemount 5300 Level Transmitter head must be configured for remote housing to
work.
The Spare Part Kit consists of:
• Remote connection
• Bracket kit
—
—
—
—
—
Reference Manual
Bracket kit
Bracket (1 pcs)
Clamping bracket (4 pcs)
U-bolt (2 pcs)
Screw (3 pcs)
Nut (4 pcs)
Bracket (1 pcs)
Clamping bracket (4 pcs)
U-bolt (2 pcs)
Screw (3 pcs)
Nut (4 pcs)
™
5300 Level Transmitter with a remote
Remote mounting
April 2019
421