Appendix D Advanced Configuration; Safety Messages; User Defined Upper Reference Point - Emerson 5301HxxxxxxxxxxxxxxZZ Series Reference Manual

Reference Manual
00809-0100-4530
D Advanced configuration
D.1

Safety messages

Instructions and procedures in this section may require special precautions to ensure the
safety of the personnel performing the operations. Information that potentially raises
safety issues is indicated by a warning symbol (
before performing an operation preceded by this symbol.
WARNING
Failure to follow safe installation and servicing guidelines could result in death or serious
injury.
• Make sure the transmitter is installed by qualified personnel and in accordance with
applicable code of practice.
• Use the equipment only as specified in this manual. Failure to do so may impair the
protection provided by the equipment.
• Do not perform any services other than those contained in this manual unless you are
qualified.
Explosions could result in death or serious injury.
• Verify that the operating atmosphere of the transmitter is consistent with the
appropriate hazardous locations certifications.
• Before connecting a handheld communicator in an explosive atmosphere, ensure the
instruments in the loop are installed in accordance with intrinsically safe or non-
incendive field wiring practices.
• Do not remove the gauge cover in explosive atmospheres when the circuit is alive.
D.2

User defined upper reference point

An Upper Reference Point other than the standard Transmitter Reference Point can be
specified by setting the Distance Offset parameter as illustrated in
Reference Manual
Advanced configuration
). Refer to the following safety messages
Figure D-1:
April 2019
397