Oundation Fieldbus Overview - Emerson 5301HxxxxxxxxxxxxxxZZ Series Reference Manual

Configuration
April 2019
20. If an ideal tank shape is selected, then enter the Tank Diameter and Tank Length
21. If Strapping Table is selected, starting at the bottom of the tank, for each new
22. (Optional) Enter the Volume Offset value. See
5.8 F
OUNDATION
This section provides a brief overview of F
Rosemount 5300 Level Transmitter.
For detailed information about F
to the Rosemount 5300 F
Figure 5-7
Figure 5-7: Function Block Diagram for the Rosemount 5300 with F
Fieldbus
A. F
B. Register transducer block
C. Level transducer block
D. Resource block physical device information
E. Advanced configuration block
Note
It is highly recommended that you limit the number of periodic writes to all static or non-
volatile parameters such as HI_HI_LIM, LOW_CUT, SP, TRACK_IN_D, OUT, IO_OPTS, BIAS,
STATUS_OPTS, SP_HI_LIM, and so on. Static parameter writes increment the static
revision counter, ST_REV, and are written to the device's non-volatile memory. Fieldbus
devices have a non-volatile memory write limit. If a static or non-volatile parameter is
144
• Horizontal cylinder
• Vertical bullet
• Horizontal bullet
(not for spherical tanks). See
point, enter the total volume up to the specified level value. See
further information.
information.
™
Fieldbus overview
OUNDATION
illustrates how the signals are channeled through the transmitter.
Fieldbus compliant communications stack
OUNDATION
Standard tank shapes
Volume offset
Fieldbus block operation with the
OUNDATION
Fieldbus technology and function blocks, refer
OUNDATION
Fieldbus Block Reference
Reference Manual
00809-0100-4530
for further information.
Strapping table
for further
Manual.
OUNDATION
Rosemount 5300 Level Transmitter
for