Appendix 4.3.2 Operation Of Gx Configurator-Sc - Mitsubishi Melsec-L Series User Manual

Appendix 4.3.2 Operation of GX Configurator-SC

App. - 28
When using GX Configurator-SC to set C24 parameters, display methods such as
setting screens vary from those of GX Works2.
In this section, the screen displaying methods of GX Configurator-SC are explained.
Also, since the setting contents are the same as GX Works2, refer to Chapter 7.
When using GX Configurator-SC, configure the settings in the following screens.
Screen name
Flash ROM setting
Select monitor/test module
Auto refresh setting
Application
Change the initial values of the C24 buffer memory
to register them to the flash ROM.
Monitor the operating status and set values of the
C24 and test its output signals.
Configure the setting to automatically transfer the
data in the C24 buffer memory to the CPU module
device.
APPENDIXES
App. - 28