Mc Protocol System Setting - Mitsubishi Melsec-L Series User Manual

8.1.2 MC protocol system setting

8 - 3
Perform the system setting for data communication using the MC protocol by GX
Works2.
(1) Switch setting
Set the transmission specification, the communication protocol with external
devices and others.
Always perform this setting.
For the communication protocol setting, select one from the MC protocols
(Formats 1 to 5).
Configure other settings according to the system being used.
For details of the settings, refer to Chapter 7.
(2) Parameter settings
Initial values of buffer memory can be changed by setting each parameter and
writing to the flash ROM.
Set each parameter to match the system used.
For the items that can be set by MC protocol, refer to Section 7.2.
For the method for displaying the screen, refer to Section 7.4.1.
8 DATA COMMUNICATION USING THE MC PROTOCOL
8 - 3