Station Number Setting - Mitsubishi Melsec-L Series User Manual

7 SETTINGS FOR THE C24

7.3.4 Station number setting

This setting is for communication using the MC protocol.
When several serial communication modules are connected on the same line with
multidrop connection, specify the serial communication module to communicate with
external devices by the station number.
Set the station numbers from 0 to 31.
Set the station number to 0 when the system configuration of the external device and
the CPU module is 1:1.
C24
External device
Station 0 Station 1 Station 2 Station 31
7 - 16 7 - 16