Mitsubishi Melsec-L Series User Manual page 115

Step 5: Write the protocol setting data to the flash ROM.
Step 6: Execute the protocol with a dedicated instruction.
CPRTCL Predefined
execution protocol
command ready
Step 7: Confirm the protocol execution in the protocol execution log.
9 - 5
(From the previous page)
9 DATA COMMUNICATION USING THE PREDEFINED PROTOCOL
Display the "Module Write" screen in the
following procedure.
[Module Read/Write]
Select a target module, and write the
protocol setting data to the flash ROM.
Set values are in the
Send data storage area.
Protocol No.1 is specified.
With a dedicated instruction (CPRTCL),
execute the protocol that was written to
Protocol is executed.
the flash ROM.
Normal completion flag
ON
Error completion flag ON
Error code is stored.
In the Protocol execution log list,
information of the executed protocol, such
as protocol name, start time and date,
end time and date, execution result, can
be monitored.
[Write to Module]
9 - 5