Mitsubishi Melsec-L Series User Manual page 86

7.3 Switch Setting
7 - 11
[Setting purpose]
Set the transmission specifications and communication protocols for
communication with external devices.
[Startup procedure]
Display the "Switch Setting" screen.
Project window
Setting]
[Setting screen]
POINT
• When GX Works2 or a GOT is connected to the C24 on a 1:1 (one-to-one) basis:
The switch setting is not required for accessing or monitoring an LCPU. (If the
switches are not set, MELSOFT Connection mode will be active.)
• When GX Works2 or a GOT is connected to the C24 on a 1:n (multidrop) basis:
Refer to the GX Works2 Version1 Operating Manual (Common).
[Intelligent Function Module]
7 SETTINGS FOR THE C24
Module model name [Switch
7 - 11