Adding The C24 To Projects - Mitsubishi Melsec-L Series User Manual

7.1 Adding the C24 to Projects

[Setting purpose]
[Startup procedure]
[Setting screen]
[Setting description]
Module Selection
Mount Position
Title Setting
7 - 2
Add the C24 to projects with GX Works2 to perform various settings.
Display the "New Module" screen.
Project window [Intelligent Function Module]
Item name
Module Type
Module Name
Mounted Slot No.
Specify start XY
address
Title
Right click
Settings
Set "Serial Communication".
Select the module model name to connect.
(Example: LJ71C24)
Set the slot No. where the module is
connected.
The start I/O signal (hexadecimal) of the
target module corresponding to the mounted
slot No. is set. It can be set arbitrarily.
Enter any title.
7 SETTINGS FOR THE C24
[New Module]
7 - 2
7