Mitsubishi Melsec-L Series User Manual page 126

Item
Element Name Set a name of the element.
Conversion
Fixed Number of Data
Fixed Number of Data/
Variable Number of
Variable Number of Data
Data
Set the number of data to be sent and received.
Number of Data/
(For "Variable Number of Data", set the maximum number of data that can
Maximum Number of
be specified to the data length storage area.)
Data
The range is 1 to 256.
9 - 16
(6) Conversion Variable
This element converts the numerical data in the device memory of a CPU module
or buffer memory to an ASCII string and sends it, or converts the receive data
(ASCII string) to the numerical data and stores it to the device memory of a CPU
module or buffer memory.
The following lists the items.
HEX ASCII
Decimal
HEX
ASCII Hexadecimal
ASCII Decimal
HEX
ASCII Hexadecimal
HEX
9 DATA COMMUNICATION USING THE PREDEFINED PROTOCOL
Description
Converts numeric value stored in the data storage
area to ASCII decimal.
Converts numeric value stored in the data storage
area to ASCII hexadecimal.
Treats receive data as ASCII decimal, converts it
to numeric value, and stores it to the data storage
area.
Treats receive data as ASCII hexadecimal,
converts it to numeric value, and stores it to the
data storage area.
Fixes the number of data to be sent and received.
When sending: Specifies the number of data at
the time of the protocol execution
and sends the data.
When receiving: Receives data of which the
number is variable.
Remark
-
-
-
For Variable
number of digits,
delimiters are
required.
-
9 - 16