Execution Of The Circuit Trace - Mitsubishi Melsec-L Series User Manual

13.1.2 Execution of the circuit trace

13 - 3
The trace data is stored in the monitor buffer to trace the communication data and
communication signal status.
[Basic operation]
1. GX Works2
Communication Module]
2. Click the Module Selection button to select the module to trace in the
"Module Selection (Circuit Trace)" screen.
Click the OK button.
3. Select the channel to trace from "Channel Selection" and click the
Start Trace button.
4. When the monitor buffer is full or the Stop Trace button is clicked, the trace
data are displayed.
5. Confirm the send/receive packets and communication control signals from the
displayed trace result.
[Tool] [Intelligent Function Module Tool]
[Circuit Trace]
13 DEBUG SUPPORT FUNCTION
[Serial
13 - 3