Appendix 6.3.2 Head Module Setting - Mitsubishi Melsec-L Series User Manual

Appendix 6.3.2 Head module setting

App. - 63
(1) PLC parameter setting
Set the PLC parameters using GX Works2 as shown below.
For details on the PLC parameters of the head module and network parameters,
refer to the MELSEC-L CC-Link IE Field Network Head Module User's Manual.
[Operation procedure]
Project window
Communication Head Parameter Setting]
[Setting screen]
(2) Adding the C24 to the project
To perform the various C24 settings, the C24 must be added to projects of GX
Works2. For details on the adding method, refer to Section 7.1.
(3) Auto refresh setting
To send or receive the data using the nonprocedural or bidirectional protocol, the
auto refresh must be set.
For details on the auto refresh setting, refer to Section 7.5.
[Parameter] [PLC Parameter]
APPENDIXES
[CC-Link IE Field
"Communication Head Setting"
App. - 63