Mitsubishi Melsec-L Series User Manual page 257

Item
Circuit Trade Data Storage Area Setting
Start Address
Size
Stop Setting
Stop by occurrence of timer 0 time-out
error
1 The maximum address for the trace data storage space is calculated by the following formula.
Maximum address for the trace data storage space = "Start Address" + "Size" – 1
13 - 6
3. In the "Circuit Trace Option" screen, set "Start Address", "Size", and "Stop
Setting" of the monitor buffer area, and click the OK button.
[Display/Setting details]
—
Set the starting address of the monitor buffer area.
Input the setting in hexadecimal.
• Input range
CH1/CH2: 2600
Set the size of the monitor buffer area.
Input the setting in hexadecimal.
• Input range
CH1/CH2: 3 to 1A00 words (3 to F00 words for the user setting area)
Set the maximum address
range between 2602
Note that the range of this value is checked at start of the circuit trace
when using the user free area.
—
Set whether or not the circuit trace is stopped when the timer 0 time out
error occurs.
Display/Setting details
to 3FFD (C00 to 1AFD
H H H
1
for the trace data storage space to be in the
to 3FFF . (C02 to 1AFF
H H H
13 DEBUG SUPPORT FUNCTION
for the user setting area)
H
for the user setting area)
H
13 - 6