Mitsubishi Melsec-L Series User Manual page 127

Item
1 to 10
Number of Digits of
Data
Variable Number of
Digits
Blank-padded
0/Space
Character
Select how many words are manipulated as one data in the data storage
area.
Conversion Unit
For 'Word', converts data manipulating one word as one data.
For 'Double word', converts data manipulating two words as one data.
Sign
Sign Character None/+/0/Space
No Decimal Point/
Number of Decimals Variable Point/
1 to 9
No Delimiter/
Delimiter Comma/
Space
Data Storage Area
Specify a starting device to store variable value.
Specification
9 - 17
Unsigned/Signed
9 DATA COMMUNICATION USING THE PREDEFINED PROTOCOL
Description
Set the number of digits per one send and receive
data.
When the number of digits of data is less than the
specified number of digits, upper digits are filled
with blank-padded characters.
When sending: Sends only the data division
converted to an ASCII string in
variable length.
When receiving: Receives only an ASCII string of
the data division in variable
length.
When the maximum data length
is set to 2 or greater, blank-
padded characters are required.
Select a character used to fill upper digits when
"Number of Digits of Data" is not "Variable
Number of Digits" and the number of digits of
send/receive data is less than the specified
number of digits.
Select whether to add signs to date in the data
storage area. This item can be set when
"Conversion" is "HEX
Decimal HEX".
Select the sign character for positive value on line.
This item can be set when "Conversion" is "HEX
ASCII Decimal" or "ASCII Decimal
and "Sign" is "Signed".
The sign character for negative value is fixed to "-
".
Select the decimal point position of data on line.
This item can be set when "Conversion" is "HEX
ASCII Decimal" or "ASCII Decimal
Select the delimiter inserted after one data.
A delimiter is not added to the end of data when
the number of data is 2 or more.
ASCII Decimal" or "ASCII
HEX",
HEX".
Remark
-
-
-
-
-
-
-
-
-
9 - 17