Control Unit - Omron EQUO Series User Manual

2.3.2 Control Unit

(1) Control Key
Name
MODE Key
Item Selection
(△ Key)
Item Selection
(▽ Key)
SET/REC/STOP Key
(2) Reset Switch
The reset switch is provided inside the aperture on the left side of the Air Flow Station unit.
Used when an SD memory card is not available when recording stops, or when error
recovery cannot be made. Use a thin-tipped object (insulator) such as a pen to press the
switch. The unit resets itself.
Do not touch the front keys when the unit is in reset process, until the air flow rate is
displayed.
Reset operation does not initialize the settings made on the unit.
(3) Inserting/Removing SD memory card
The Air Flow Station provides an SD memory card slot for SD memory card operation such
as writing the measured data recorded in the internal memory to the card, and
writing/reading the setting data to/from the card.
Important
・Secure the unit firmly when inserting/removing an SD memory card. It is essential
especially when the unit is mounted using the screw hook holes. If the card is inserted /
removed without securing the unit, the unit may be detached from the hooks and drop
on the floor, damaging itself.
・Do not remove the SD memory card when the "SD" on the display unit is blinking. Doing
so may destroy the data in the SD memory card.
・Do not touch the metal terminal of the SD memory card.
・Make sure that the SD memory card does not bend.
・Avoid static electricity when inserting/removing an SD memory card.
・Do not enable the write-protection of the SD memory card.
Switches the operation mode.
Resets an alarm or error (Long press).
Cancels the setting before applying it.
Moves the setting items (Upward).
Switches the display.
Key
Changes the setting value (Incremental).
Sequentially switches the Air Flow Sensor IDs
(Long press).
Moves the setting items (Downward).
Key
Switches the display.
Changes the setting value (Decremental).
Applies the setting value or changes.
Starts/stops recording (Long press).
Saves the recorded data to the SD memory card.
2-9
2. Part Name and Function
Function