Omron EQUO Series User Manual page 6

Air Flow Station
●Warning Indications
The mounting magnets (separately sold) for the product have strong
magnetism. If the product is mounted using these magnets, anyone wearing a
heart pacemaker must not operate the product; or the product must not be in
proximity of such a person.
This product contains a lithium battery. Serious injury may occur due to fire or
explosion. Do not attempt to disassemble the product, deform it by applying
pressure, heat it in a high temperature (100℃ or more), or burn it for disposal.
Tighten the terminal screws at a recommended torque: 0.69 to 0.88N・m.
Make sure that the screws are not slanted away from the center after
tightened.
A minor or moderate injury or property damage may occur due to explosion.
Do not use the product in an environment containing an inflammable or
explosive gas.
An electric shock or minor injury as well as fire or unit malfunction may
occur. Do not attempt to disassemble, repair or modify the product.
Air Flow Sensor (D6FZ-Series)
●Warning Indications
The use of flammable gases may cause explosion. Do not use the product
with flammable gases.
An electric shock may occur. Do not connect to an AC power source.
Injury may occur due to explosion. Flow rate and pressure must be within
the range of use.
Don't measure other than air and nitrogen gas.
<D6FZ-FGT>
If water drop, oil, mist and dust flow in the body, it may mismeasurement
and destruction. Use clean fluid. Dust and mist can affect the characteristics
of Sensor or damage the sensor. Install a filter and mist separator on the
upstream tube. Moreover, install an air flow sensor after removing the dust
remaining in pipe by something like air blow.
WARNING
CAUTION
WARNING
CAUTION
v