Omron EQUO Series User Manual page 70

D6FZ-FGS1000
The range of selection (Numeric input):
0 to 1000
Initial value:
1000
D6FZ-FGT
The range of selection (Options):
-----
Initial value:
(none)
Note
The Flow rate full-scale value setting is not available when NN.SET is set to OFF.
(7) Frequency of Averaging
Specified the frequency of averaging when obtaining the measured value.
The range of selection (Options):
1/2/4/8/16/32 (times)
Initial value:
16
Note
The Frequency of averaging setting is not available when NN.SET is set to OFF.
* For D6FZ-FGT, default value is "8".
(8) Measurement Target Gas
Specifies the gas to be measured by the Air Flow Sensor unit.
D6FZ-FGS1000
The range of selection (Options):
AIR / N
2
Initial value:
AIR
D6FZ-FGT
The range of selection (Options):
-----
Initial value:
(none)
Setting Value
AIR
N
2
Note
The Measurement target gas setting is not available when NN.SET is set to OFF.
(9) Others (ETC)
Specifies if the unit displays the items for setting file read/write, time setting, IP address,
rate/CO conversion value setting and conversion unit setting.
2
4. Setting (Air Flow Station Operation)
Description
Air
Nitrogen
4-8