Omron EQUO Series User Manual page 75

(18) Unit of Display Setting (FUNIT)
Specifies the unit for displaying the momentary standard flow rate.
The range of selection (Options):
3
L/min, m /min, L/h m
Initial value: L/min
Note
The unit of display cannot be specified when ETC is set to "OFF".
(19) Auto backup and restarting record setting（REREC）
When this function is ON, if power shutdown happens during the record, the recorded
measurement data before the interruption of power is backed up to SD memory card and
record is resumed after power is back.
While this function is ON, insert the recordable SD memory card into the SD memory card
slot.
After restarting record, integrated flow value is not cleared.
3
/h
4-13
4. Setting (Air Flow Station Operation)