Omron EQUO Series User Manual page 71

The range of selection (Options):
OFF / DISP
Initial value: OFF
Setting Value
OFF
DISP
Note
The ETC setting returns to "OFF" when the unit is reset.
(10) Reading Setting Data (RESTR)
Restores the Air Flow Station unit settings by using the SD memory card with the setting
data saved as a backup using the BCKUP setting (described later).
Operation:
Insert the SD memory card containing the setting data, and hold the SET/REC/STOP
key. Reading is completed when "DONE" is displayed.
The process standby display appears and initialization starts after the process is
complete. If the key is released before the process is complete, initialization is
cancelled.
The unit resets itself when the MODE key is pressed twice and THR mode is exited
after initialization is complete.
Note
・Only one setting data item (the setting data for only one Air Flow Station unit) can be
stored in a single SD memory card as a backup.
・Setting data reading is not possible when ETC is set to "OFF".
・Air Flow Sensor settings are not backed up.
The unit does not display the items for setting file read/write, time
setting, IP address, rate/CO
conversion unit setting.
The CYCLE item returns when the ▽ key is pressed after the
setting is applied with the SET/REC/STOP key.
The unit displays the items for setting file read/write, time setting, IP
address, rate/CO conversion value setting and conversion unit
2
setting.
The RESTR item is displayed when the ▽ key is pressed after the
setting is applied with the SET/REC/STOP key.
4-9
4. Setting (Air Flow Station Operation)
Operation
conversion value setting and
2