Omron EQUO Series User Manual page 79

(3) Change the setting item value for the Air Flow Sensor unit.
The values for the Pulse setting (NN.PLS), Flow rate full-scale (NN.SCL), Frequency of
averaging (NN.AVE) and Measurement target gas (NN.GAS) items can be changed in the
same way.
(Refer to "4.2.5 Changing Air Flow Station Set Value" for the operation procedure.)
* Flow full-scale value and measurement target gas can be set by only D6FZ-FGS1000.
On D6FZ-FGT, the "-----" is displayed and the setting is not available.
(4) To change set values for Air Flow Sensor unit, display the target sensor's ID in RUN
mode and repeat steps 1 to 3.
During changing setting values by Air Flow Station, the indicator of the D6FZ-FGS1000 is
blinking with yellow light, and D6FZ-FGT displays "REMOTE" and key operations are
not available.
When mode of the Air Flow Station is returned to RUN-mode, the sensors will return to
normal operation.
4. Setting (Air Flow Station Operation)
4-17