Omron EQUO Series User Manual page 74

(15) IP Address and Subnet Mask (IP 1 to IP 4, SUB 1 to SUB 4)
Specifies the 4 segments of the IP address (IP 1 to IP 4) and the 4 segments of the subnet
mask (SUB 1 to SUB 4).
The range of selection (Numeric input):
IP 1, IP 2, IP 3, IP 4: 0 to 255
SUB 1, SUB 2, SUB 3, SUB 4: 0 to 255
Initial value: IP 1.IP 2.IP 3.IP 4 = 192.168.0.20
SUB 1.SUB 2.SUB 3.SUB 4 = 255.255.255.0
Note
・ The unit resets itself when the MODE key is pressed twice and THR mode is exited, after
the IP address and subnet mask values have been changed and applied with the
SET/REC/STOP key.
・ The IP address and subnet mask settings are not possible when ETC is set to "OFF" and
IP is also set to "OFF".
(16) Rate/CO Conversion Value Setting (RATE)
2
Specifies the rate or CO
The range of selection (Numeric input):
0.000 to 99.999 (times)
Initial value: 0
Note
The rate/CO conversion value setting is not possible when ETC is set to "OFF".
2
(17) Conversion Unit Setting (CONV)
Specifies the unit for the rate/CO
The range of selection (Options):
JPY (Japanese yen) / USD (US dollar) / EUR (Euro) / CNY (Chinese yuan) / KRW
(Korean won) / CO
Initial value: JPY
Note
The conversion unit setting is not possible when ETC is set to "OFF".
emission level per 1 m
2
conversion setting (RATE).
2
(CO emission level per 1m
2 2
4-12
4. Setting (Air Flow Station Operation)
3
of integrated flow rate.
3
)