Omron EQUO Series Startup Manual

D
For further information, refer to the Instruction Sheet in the package
and a user's manual.
HMC-SD291 (2GB)
Recommended SD card:
HMC-SD491 (4GB)
Power Monitor KM-N1-FLK,KM-N2-FLK,
KM-N3-FLK
HMC-SD291 (2GB)
Recommended SD card:
HMC-SD491 (4GB)
Terminal names may differ depending on the model type.
See below to make communication setting of the KM series.
Unit No.: A consecutive number starting from 1.
To change the starting number (other than 1), other setting is required.
Baud rate: 38400 bps
Data bit length: 7-bit
Stop bit length: 2-bit
Vertical parity: even
Caution The connected Power Sensor/Monitor units must be turned ON before the Power Sensor Station.
If the order is reversed, the station may not correctly recognize the type names of the Power Sensor/Monitor units,
which may result in power data acquisition failures.
・To directly connect KM-N1-FLK, KM-N2-FLK and
KM-N3-FLK to ZN-KMX21-□, please purchase a
separately sold dedicated connection cable
ZN9-KMC30-N.