Omron EQUO Series User Manual page 77

(2) Changing Numeric Input Type Item Value (Example: YEAR)
Press the MODE key several times to enter FUN mode, and press the ▽ or △ key to
display YEAR.
To display YEAR, ETC and CLOCK must have been set to DISP beforehand.
Display
(Upper/Lower)
CYCLE
1s
("FUN" Blinking)
↓
▽or △ Key
Display
(Upper/Lower)
YEAR
2010
↓
SET/REC/STOP Key
Display
(Upper/Lower)
YEAR
2010
↑Blinking
↓
▽or △ Key
Display
(Upper/Lower)
YEAR
2011
↑Blinking
↓
SET/REC/STOP Key
Display
(Upper/Lower)
YEAR
2011
Use the △ or ▽ key again to display another setting item and MODE key to change the
operation mode.
Press the MODE key repeatedly until "FUN" starts blinking.
"CYCLE" is displayed at the upper row.
Press the ▽ or △ key to display YEAR. To display YEAR, ETC
and CLOCK must be set to DISP.
Press the SET/REC/STOP key, then, the last digit number at the
lower row starts blinking.
The value increases or decreases at a press of the △ or ▽ key.
The amount of increase/decrease becomes larger by holding △ or
▽ key.
To cancel the setting attempt, press the MODE key.
Press the △ or ▽ key to display the desired value, and press the
SET/REC/STOP key.
The setting is complete when the value stops blinking.
4-15
4. Setting (Air Flow Station Operation)
Operation
Operation
Operation
Operation
Operation