G250 Fixed Ports And Buttons - Avaya G250 Installing And Upgrading

G250 fixed ports and buttons

Table 10: Fixed ports and buttons on the G250 front panel
Port
TRUNK
LINE
CONSOLE
USB
CCA
ETH WAN
ETH LAN POE
RST
ASB
The front panel of the Avaya G250 Media Gateway
Description
Four analog trunk ports.These fixed trunk ports
support loop-start, DIOD (for Japan only) trunks,
and caller ID detection.
Two analog telephone ports.
An analog relay provides Emergency Transfer
●
Relay (ETR) feature. The relay is between
TRUNK port 304 and LINE port 305.
Also used for incoming analog DID trunks.
Console RS-232 interface port for direct
connection of CLI console. RJ-45 connector.
USB port. Supports the connection of:
USB flash drive
●
USB externally powered hub
●
The Multitech MultiModemUSB
MT5634ZBA-USB-V92 USB modem
RJ-14 port for ACS (308) contact closure adjunct
box.
RJ-45 10/100 Base TX Ethernet port for
connection to a cable or DSL broadband modem/
router.
Eight Power over Ethernet (PoE) LAN ports with
80 watts (aggregated for all ports) for connecting
IP phones or any Ethernet devices, such as PCs.
Reset button. Resets chassis configuration.
Alternate Software Bank button. Reboots the G250
with the software image in the alternate bank.
Issue 6 November 2009 103