Downloading G250 Firmware Files To A Local Tftp Server - Avaya G250 Installing And Upgrading

Upgrading the G250 firmware
Note:
A Linux or Unix TFTP server should be used only if a Linux or Unix TFTP server
Note:
already exists on the local network. In this case, download the appropriate files to
your laptop and give it to the customer for proper placement and execution.

Downloading G250 firmware files to a local TFTP server

1. Access the
2. Navigate to the G250 Media Gateway Downloads section:
A list of firmware files appears.
3. Locate the file names that match the files listed in your installation worksheet. See
Table 6: Sample Software and Firmware Filenames
names.
4. Double-click the file name of the file you want to download. A File Download window
appears.
Note:
Downloading files can occasionally add a [1] to the file name. Rename the file if
Note:
necessary.
5. Select Save this file to disk.
6. Save the file to directory on the TFTP server on the local LAN that was created for this
purpose. See
Note:
If you are performing the upgrade using the G250's Command Line Interface
Note:
(CLI), you can place the upgrade files on an FTP server. However, the GIW
requires that the files be placed on a TFTP server.
Note:
Use WinZip or another zip file tool to unzip the file, if necessary, before you copy
Note:
the file to the TFTP server.
Table 6: Sample Software and Firmware Filenames
Component
G250 Processors
G250 Processor
76 Installing and Upgrading the Avaya G250 Media Gateway
www.avaya.com/support
Setting up a TFTP server
Web site.
on page 76 for sample firmware file
on page 75.
Filename Example
G250_sw_21_11_0.bin