Avaya G250 Installing And Upgrading page 50

Connecting and enabling a modem for remote access
Note:
Firmware upgrades for the G250 and media modules can either be installed from
Note:
CD or downloaded from the Web.
2. Download Gateway Installation Wizard (GIW) from the Avaya website
(support.avaya.com/avayaiw) to the laptop computer. The laptop should be running
Windows 2000 or Windows XP to support GIW.
3. Install GIW by double-clicking the file you downloaded in step 2.
4. Plug one end of the provided flat RJ-45 to RJ-45 cable into the provided DB-9 adapter.
5. Plug the RJ-45 connector at the other end of the cable into the CON port of the G250.
6. Plug the DB-9 end of the flat cable into the COM port of the laptop computer.
7. From your laptop computer, double-click the GIW icon to run GIW. The Overview screen
appears.
Figure 10: Gateway Installation Wizard Overview screen
8. Click Continue. The COM Port Selection screen appears.
9. Select the COM port on the laptop that you are using to connect to the G250.
10. Click Continue. The G250 Wizard Usage Options screen appears.
11. Select Enable the modem for remote installation.
12. Click Continue. The G250 Modem Type Selection screen appears.
13. Select Serial Modem.
50 Installing and Upgrading the Avaya G250 Media Gateway