Adding a telephone
You must connect, configure and test the telephone before adding the telephone to the Avaya
G250 Media Gateway.
Connect the telephone
For instructions on connecting a new telephone, see one of the following sections:
Connecting an IP telephone
●
Connecting an analog telephone
●
Configure the telephone on the G250
When you add a new telephone, note the following information for software configuration:
Name and location of the owner of the telephone
●
Model number of the telephone
●
Extension of the telephone
●
Slot and port number on the Avaya G250 Media Gateway to which the telephone connects
●
Test the telephone
1. Make outgoing calls from the telephone. Make sure you hear a dial tone when you pick up
the receiver. Make sure you can make both an internal (within the local network) and an
external (outside of the local network) call.
2. Make a call to the telephone from both within the network and outside of the network.
Adding a trunk
You must order, connect, configure, and test the trunk before adding the trunk to the Avaya
G250 Media Gateway.
on page 41
on page 41
Adding a telephone
Issue 6 November 2009
65