Chapter 7: Upgrading Media Modules And Devices; Adding A Media Module; Adding Wan Modules - Avaya G250 Installing And Upgrading

Chapter 7: Upgrading media modules and
When adding new devices to the G250, consult your project manager for topology requirements
for specific ports to be connected to specific devices.

Adding a media module

WAN modules can be added to the Avaya G250 Media Gateway.
To install a new module, follow the instructions in
Consult with your project manager to find out if the network topology necessitates installing
media modules in specific slots.

Adding WAN modules

You can hot-insert WAN modules. This means you can add a WAN module to the Avaya G250
Media Gateway while the system is running, but the G250 resets when you add the module.
However, hot insertion is not recommended in most cases. Because hot insertion resets the
G250, any translation and other data that is in the running configuration but has not been saved
to the startup configuration will be lost.
There is no configuration necessary when you add a WAN module. Configuration is only
necessary when you add telephones, WAN lines, and LAN devices to the new module. See
Adding a LAN device
page 67.
devices
on page 64, Adding a telephone
Step 2: Install the media modules
on page 65, and
Issue 6 November 2009
on page 30.
Adding a WAN line on
63