Connecting An Ip Telephone; Connecting An Analog Telephone - Avaya G250 Installing And Upgrading

Connecting an IP telephone

1. Wire a telephone to a LAN port on the G250. If the IP telephone will be powered through
the G250, make sure you use a ETH LAN PoE port on the G250. In this case, you do not
need to plug the IP telephone into a power supply.
Note:
The G250-DCP does not have PoE ports.
Note:
2. Plug the telephone into the telephone port.
3. If the IP telephone will be powered independently, plug the IP telephone into a power
supply and check that the IP telephone is powered up.
4. If the IP telephone will be powered through the G250, you must use a telephone that
supports PoE, and the telephone will power up if and when PoE is configured on the port
to which the telephone is connected. For information about configuring PoE, see Chapter
10, Configuring PoE, in Administration for the Avaya G250 and Avaya G350 Media
Gateways, 03-300436.
Note:
First generation IP phones do not support PoE.
Note:
Alternatively, you can connect the telephone to an external C360 Avaya Ethernet switch. This
switch must be connected to an ETH LAN port on the Avaya G250 Media Gateway.
If the telephone is not an Avaya IP telephone, you can connect it to any port on the network
switch. Note the slot and port number on the Avaya G250 Media Gateway to which you connect
the telephone.

Connecting an analog telephone

1. Wire a telephone port to one of the two fixed LINE ports on the G250 front panel
2. Plug the analog telephone into the telephone port.
Note:
The leftmost LINE analog telephone port on the G250 front panel forms a
Note:
mechanical analog relay with the TRUNK port next to it. See
can be configured to provide emergency transferred telephone service in the
case of a power outage or disconnection from an external server. Therefore, the
analog telephone connected to this LINE jack is usually installed for this
emergency purpose. Regular analog telephones on the network are usually
connected to other analog ports.
Note:
Analog line ports support the following maximum distances:
Note:
Step 1: Connecting data and voice devices
Figure
Issue 6 November 2009
5. This relay
41