Emulations; Setting An Esp Default Emulation - QMS 1725E Reference

Default
Notes
Default Job Priority
Allows you to specify which jobs are printed first, according to the
interface through which they are received, when jobs are received
simultaneously.
Menu
Choices
Default
Notes

Emulations

Use the Administration/Emulations menu to set the parameters for
the available printer emulations. Optional printing emulations appear
only if installed.
» Note: To choose an emulation or ESP for a particular interface, use the
appropriate interface menu in the Administration/Communications menu.

Setting an ESP Default Emulation

The emulation sensing processor (ESP) feature of the QMS 1725E
Print System analyzes incoming print jobs and identifies which emula-
tion the printer will use. The ESP Default Emul sets the ESP default
emulation used when ESP is unable to identify the language of a print
4-28
Normal
See chapter 5, "Additional Technical Information," for a full
discussion of PS Protocol.
Administration/Communications/Network 2/Def Job Prio
001-100 (highest-lowest priority)
001 (highest priority)
For example, you can give jobs received via the Ethernet
interface priority over jobs received via the parallel and serial
interfaces.
QMS 1725E Print System Reference