Table of Contents
Advertisement
Minimum Number of Kilobytes for Spooling
Menu
Choices
Default
Notes
PS Protocol
Menu
Choices
6-42
Administration/Communications/LocalTalk/Min K Spool
00000-99999
00015
This value must be less than the K Mem for Spool value.
A 00000 value does not turn off the spooling buffer for the
parallel interface. If the value is set to 00000, the printer
calculates the Min K Spool automatically at initialization.
The printer must be restarted for changes to the Min K Spool
menu to take effect. You can either let the printer restart
automatically after you save the change and exit from the
Configuration menu, or you can wait for the change to take
effect the next time you manually turn on the printer.
Administration/Communications/LocalTalk/PS Protocol
—Enable standard, ASCII hex protocol. Data is sent
Normal
and received in ASCII format.
—Enable standard, ASCII hex protocol. Print
Normal Fixed
jobs cannot alter this value through PostScript operators.
—Enable binary communications protocol. Print jobs
Binary
can alter this value through PostScript operators.
printable ASCII range also prints.
—Enable binary communications protocol. Print
Binary Fixed
jobs can not alter this value through PostScript operators.
in the printable ASCII range also prints.
—Enables binary communications protocol. Print jobs
QBinary
can alter this value through PostScript operators. Data in the
printable ASCII range also prints.
—Enables binary communications protocol.
QBinary Fixed
Print jobs cannot alter this value through PostScript operators.
Data in the printable ASCII range also prints.
QMS 1725E Print System Reference
Data in the
Data
Advertisement
Table of Contents
