Rotation
Function
Syntax
Default
Notes
LineEnd
Function
Syntax
Default
C-22
Sets the rotation to be used when the image is decompressed.
%%Rotation (degree)
degree
00° rotation
9090° rotation
180180° rotation
270270° rotation
0–The image is not rotated
Rotation occurs about the current image position origin set by the
%%ImagePosition command. If no %%ImagePosition
command has been used, rotation occurs about the origin (0,0).
Any rotation (except 0) about the default image position (0,0)
causes the image to be rotated off the page. Therefore, any
rotation other than 0° must coincide with a %%ImagePosition
command.
Sets line-end flags, which indicate whether CCITT end-of-lines
are included in the image data.
%%LineEnd (true/false)
true
Indicates that end-of-lines are required in the image
data. Otherwise, an error results.
false
Indicates that end-of-lines are not required in the
image data but, if present, are accepted with no error.
false
QMS 1725E Print System Reference