Invertimage; Compression; Dpi - QMS 1725E Reference

InvertImage

Function
Syntax
Default

Compression

Function
Syntax
Default

DPI

Function
Syntax
Default
C-24
Indicates whether the data in the image is inverted.
%%InvertImage (true/false)
true Indicates that the data in the image is inverted.
false Indicates yhat the date in the image is not inverted.
false
Sets the data compression type of the data following the
%%ImageData command.
%%Compression (type)
type 0Group 4
1Group 3, 1-dimensional
2Group 3, 2-dimensional
0 (Group 4)
Sets the print resolution to match the scanned resolution of the
original image. This command can also be used to scale the
image. DPI resolutions above the original scanned resolution will
reduce the image while DPI resolutions below the original
scanned resolution will enlarge the image.
%%DPI (horizontal vertical)
horizontal
vertical
Currently selected engine resolution.
QMS 1725E Print System Reference