Memory Modules (Simms) - QMS 1725E Reference

4 Replace the metal tray assembly cover using five screws to
secure.
5 Replace the side panel and secure it using two screws.
6 Reconnect all interface cables and the power cord and turn
both printer power switches on.

Memory Modules (SIMMs)

» Note: When installing a memory upgrade, make sure the memory added is
distributed among memory clients. See the Memory submenu section in
chapter 4, “Printer Configuration,” and chapter 5, “Additional Technical
Information,” for more information on memory distribution.
Installing a SIMM
» Note: The following instructions are written for the system administrator.
Do not attempt this procedure if you have no experience working with circuit
boards.
6-20 QMS 1725E Print System Reference