Table of Contents
Advertisement
Notes
Paper Type
Identifies the original image's paper size.
Menu
Choices
Default
Pen 1 - Pen 8
Sets the width and color for the eight plotter pens. A width and a color
option are available for each pen.
»
Note: See chapter 5, “Additional Technical Information,” for more
information on the HP-GL emulation color encoding equation.
Menu
Choices
4-38
Setting this option to On partially determines the range of
plotter units for a selected media type. When the plotter
senses the media type, it automatically sets the hard clip limits
to 0.591"/15 mm on three sides and to 1.537"/39 mm on the
fourth side. However, if Expand Mode is set to On, then the
limits are set to 0.197"/5 mm on three sides and 1.143"/29 mm
on the fourth side.
The HP-GL emulation senses the media size when the Paper
Type is set to Scale to Paper or when it is set to a particular
media size through the control panel or through a QMS
Document Option Command.
Administration/Emulations/HPGL/Paper Type
Scale to Paper, A (letter/8.5"x11.0"), A4 (210x297 mm), B
(11.0"x17.0"), A3 (297x420 mm)
Scale to Paper
Administration/Emulations/HPGL/Pen x /Width
00-60 (0.1-6.0 mm)
QMS 1725E Print System Reference
Advertisement
Table of Contents
