Imagesize; Imageposition - QMS 1725E Reference

ImageSize

Function Sets the image size to be used for decompression of the image
data that follows the %%ImageData command.
%%ImageSize (width height)
Syntax
width
height
Default None.
Notes This command must be used in order to decompress an image.
This command must be sent before the %%ImageData
command. If it is not, the image is ignored.

ImagePosition

Function Sets the image position (in 0.001" increments) from the upper-left
corner of the page.
Syntax %%ImagePosition (x y)
x
y
Default 0 0—Places the image in the upper-left corner of the page.
Document Option Commands
The width of the image in pixels.
The height of the image in pixels.
The horizontal location of the image's upper-left
corner.
The vertical location of the image's upper-left corner.
CCITT
Commands
C-21