Table of Contents
Advertisement
2
Change the following Kanji settings on your printer.
»
Note: If you are unable to reassign the memory in the memory clients to
satisfy the minimum required settings shown in the preceding table, you
will need to add more memory to your printer. See the “Memory” section
found in this chapter for SIMM installation instructions.
3
A numerical value is displayed (expressed as a 5-digit num-
ber), showing the current memory setting for that specific
memory selection. Using the Previous or Next key, change
the value of each digit (up or down) to reflect the new mem-
ory setting shown in step 2.
4
Repeat steps 2 and 3 for each memory setting that needs to
be changed. If you set the wrong value for a memory client,
repeat the procedure only for that memory client.
5
When you have changed all of the specified memory clients
to their new settings, press the Menu key until the Online or
Ready indicator lights.
6-60
Memory Client
IDLE
QMS 1725E Print System Reference
Minimum Kanji Setting
Advertisement
Table of Contents
