Blockend; Ebamode; Bitreverse - QMS 1725E Reference

BlockEnd

Function Indicates whether a CCITT End of Block is included in the image
data.
%%BlockEnd (true/false)
Syntax
true
false
Default false

EBAMode

Function Sets the Encoded Byte Align flag, which indicates that the image
data is broken into individual lines that are each aligned on a byte
boundary.
%%EBAMode (true/false)
Syntax
true
false
Default false

BitReverse

Function Causes the CCITT emulation to reverse the bits within each byte
of the image data automatically.
Syntax %%BitReverse (true/false)
true
false
Default false
Document Option Commands
Indicates that a BlockEnd is required in the image
data. Otherwise, an error results
Indicates that a BlockEnd is not required in the image
data but, if present, it is accepted with no error.
Indicates that the data is encoded byte aligned.
Indicates that the data is not encoded byte aligned.
Indicates that the bits are to be reversed.
Indicates that the bits are not to be reversed.
CCITT
Commands
C-23