Table of Contents
Advertisement
If you are uncertain about how to configure your printer's memory,
use only the Administration/Memory/Frame Buffer menu. Or use this
menu as a starting point before trying manually to configure your
printer's memory. It provides a simple method of defining how much
memory should go to each of the memory clients. Menu options allow
you to specify the largest media size you plan to use for each resolu-
tion. Memory is then automatically allocated to the memory clients
that require it. Any excess memory is allocated to the excess memory
client. See chapter 5, "Additional Technical Information," for more
information on memory and the frame buffer client.
»
Note: The printer does not allow you to choose features that do not work
with the amount of memory currently installed. The Frame Buffer option
does not change the media size. It just ensures that you have enough mem-
ory allocated to the appropriate clients to print on the requested media
size.
Menu
Choices
Default
Menu
Choices
Default
Printer Memory
MB Printer Mem, listed as System Use on the status page, is the
number of megabytes of RAM available to be split among the various
memory clients. The size of this client's memory limits the number of
jobs that may be queued simultaneously. When this client's memory
is exhausted, the printer slows down, and the hosts are forced to wait.
Menu
Choices
Default
4-52
Administration/Memory/Frame Buffer/300 dpi
Letter/A4, legal
Letter/A4
Administration/Memory/Frame Buffer/600 dpi
Letter/A4, legal
Letter/A4
Administration/Memory/MB Printer Mem
00012-00064
Depends on the amount of memory installed.
QMS 1725E Print System Reference
Advertisement
Table of Contents
