Installing The Intellifont Simm - QMS 1725E Reference

Installing the Intellifont SIMM

M
WARNING!
cover off the printer.
A CHTUNG!
Netzstecker heraus bevor Sie die Druckerabdeckung öffnen.
O
: It's very important to protect the printer tray assembly from
Caution
electrostatic damage while performing this task.
If an anti-static wrist strap is provided
one end of it to your wrist and the other end to any convenient electrical
ground (for example, the bare metal chassis of equipment, as on the back of
a computer, that is plugged in
strap to any piece of equipment with an electrical current present. Turn off
all power switches first. Plastic, rubber, wood, painted metal surfaces, and
telephones are not acceptable grounding points. The printer isn't an
acceptable grounding point either because it must be unplugged before you
perform this task.
If you don't have an anti-static wrist strap
electric charge by touching a grounded surface before you handle any printer
boards or components and before removing the tray assembly cover.
Redischarge your body each time after walking around and before touching
the printer tray assembly again.
1 Access the printer tray assembly.
2 Position the tray assembly so the interface panel is on your
right.
3 Remove the SIMM from the anti-static bag.
6-24
Turn off the printer and unplug the power cord before taking the
Bitte schalten Sie den Drucker aus und ziehen Sie den
QMS 1725E Print System Reference
in your printer option kit, attach
). Never attach the wrist
but turned off
, discharge your body's static