QMS 1725E Reference page 44

Once you have changed the current input character, use the following
keys to move the cursor to another input character:
Press this key
Select
Menu
To exit from the character selection process, move the cursor to the
last character of the input field (the character farthest to the right) and
press the Select key, or move to the first character of the input field
(the character farthest to the left) and press the Menu key.
When you exit, the printer verifies character information and confirms
it in the message window. If character information is valid, you're
returned to the previous menu; if it's invalid, you're returned to the
input field. Press the Menu key to cancel any changes to the charac-
ter information.
If the current character information is longer than the value that you
need to enter, replace each extra character with a space. The printer
interprets a space at the end of character information as a blank.
Example
To change the HP-GL emulation scaling percent, press the control
panel keys in the order shown in the following table. The printer
responds by displaying a status message or configuration menu in
the message window. An underline indicates the current input charac-
ter in the message window.
» Note: You may need to press the Next key more than one time to advance
through the list of selections or options.
Press this
key
Online/
Offline
Menu
Next
4-8
to...
Advance the cursor to the next character.
Return the cursor to the previous character.
to...
Turn off the Online/Offline indicator and
readies the printer for configuration.
Access the configuration menu.
Advance to the Administration menu.
QMS 1725E Print System Reference
The message
window reads...
IDLE
CONFIGURATION
OPERATOR CONTROL
CONFIGURATION
ADMINISTRATION