QMS 1725E Reference page 56

Default Job Priority
Allows you to specify which jobs are printed first, according to the
interface through which they are received, when jobs are received
simultaneously. For example, you can give jobs received via the serial
interface priority over jobs received via the parallel and Ethernet inter-
faces.
Menu
Choices
Default
Baud Rate
Sets the rate data is transmitted (bits per second) over the serial
interface.
Menu
Choices
Default
Notes
Parity
Sets the check bit used to identify data transmission errors.
Menu
Choices
Default
Notes
Ignore Parity Errors
Specifies how the printer should handle parity errors.
Menu
4-20
Administration/Communications/Serial/Def Job Prio
001-100 (highest-lowest priority)
001 (highest priority)
Administration/Communications/Serial/Baud Rate
300, 600, 1200, 2400, 4800, 9600, 19200, 38400
9600
Baud rates of 19200 and 38400 require hardware flow control
(Administration/Communications/Serial/Hdwe Flow Ctl menu).
Administration/Communications/Serial/Parity
None, Odd, Even
None
The printer's parity setting must match that of the host or
application.
Use the Administration/Communications/Serial/Ignore Parity
menu to specify how the printer handles parity errors.
Administration/Communications/Serial/Ignore Parity
QMS 1725E Print System Reference