Accessing The Configuration Menu - QMS 1725E Reference

n
Administration Menu
Use this menu to maintain printer-host communication informa-
tion, and for selecting and configuring printer emulations, config-
uring special pages, printing engine calibration, and configuring
hard disks (if installed).
» Note: For information on printer-host communication using the
Ethernet interface or any options under the CrownNet submenu
(Administration/Communications/Network 2/CrownNet), see chapter
2, “Printer Configuration,” in the
Adm inistrator’s Guide
n
Installation Menu
Use this menu to establish passwords for the Operator Control
and Administration menus. This menu displays only when an
optional security card is installed.

Accessing the Configuration Menu

To access the configuration menu, make sure the printer is idle (IDLE
displays in the message window), then press the Online/Offline key to
take the printer off line (the Online/Offline indicator is not lighted), and
finally press the Menu key.
Example
The following table shows how to use control panel keys to access
the printer configuration menu. Press the control panel keys in the
order shown. The printer responds by displaying a status message or
configuration menu in the message window.
» Note: You may need to press the Next key more than one time to advance
through the list of options.
Press this to...
key
Online/ Turn off the Online/Offline indicator and
Offline ready the printer for configuration.
Menu Access the configuration menu.
Printer Configuration
QMS CrownNet Interface System
.
Configuration Menu
The message
window reads...
IDLE
CONFIGURATION
OPERATOR CONTROL
4-5