Emulations - QMS 1725 SLS User Manual

This menu contains several options that allow you to configure the
printer's communication parameters to match the host and application
parameters.
The Timeouts options limit the amount of time the printer waits on
transmission from the host for various types of data.
The PostScript emulation timeout is the maximum number of seconds
the PostScript emulation waits for incoming data.
Menu Administration/Communications/Timeouts/PS Wait Timeout
Choices 00000-99999
Default 00030 (30 sec.)
Notes A value of 000 is the same as infinity (no timeout).
The job is closed and the next job in the queue begins if all of
the following occur:
An EOD (end-of-document commands) was not seen.
When a print job is sent from a Macintosh, the PS Wait timeout
is automatically changed to 00300 (5 min.).
Large print jobs, such as those generated by graphics or
computer-aided design applications, require timeouts of 00300
(5 min.).
No additional data is received during the specified
period of time.
The interface didn't time out.