Bowflex Max Trainer M3 Service Manual page 91

18. Using an 8mm hex wrench, remove the indicated hardware from the
Rail Assembly.
19. Using a 6mm hex wrench, remove the indicated hardware from the
Rail Assembly. Be prepared to support the weight of the Rail Assembly.
20. Using new Hardware Items C, N, and D, attach the Rail Assembly to the new Frame Assembly.
Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps
involving these parts. Do not do steps that involve heavy lifting or awkward movements on your own.
NOTICE: Hand tighten hardware.
Rail Assembly
Rail Assembly
91
X4
C
N
D