Bowflex Max Trainer M3 Service Manual page 112

1. Unplug the AC Adapter from the machine and wait 5 minutes.
2. Using a #2 Phillips screwdriver, remove the indicated (by ovals) screws
and only loosen the lowest indicated screw (arrow) from the Right Fan
Cover.
3. The Right Fan Cover has a tab that needs to be pushed upward to clear
the loosened screw. While pushing up on the tab, remove the Right Fan
Cover from the assembly.
Note: the AC Power Cable is attached to the inside
of the Right Fan Cover. Be sure not to crimp the cable
by placing the Right Fan Cover close to the front of the
machine.
Tab
Note: The Left Fan Cover has been removed from the following images
for clarity.
4. Disconnect the Cable Connection to the Potentiometer.
Note: Do not crimp the Cable.
Cable Connection
Potentiometer
112