Bowflex Max Trainer M3 Service Manual page 43

Note: The Bowflex Max Trainer
procedure is the same for the M5 model.
1. Unplug the AC Adapter from the machine and wait 5 minutes.
2. Using a #2 Phillips screwdriver, remove the 4 screws (2 indicated on
each side) from the Console Assembly.
3. Carefully lift the Console Assembly and expose the Cable Connections.
Note: do not crimp any of the Console Cables.
4. Carefully disconnect the Cables noting their locations (see arrows).
Note: do not crimp any of the Console Cables.
5. Using a #2 Phillips screwdriver, remove the indicated screw (see oval)
from the rear of the Console Display.
M3 is used in the following images. The
®
Console Assembly
43
M5
only